🔍

Grundfos 43 Series Spa Circulation Pump — 1/15 HP, 115V, 1″ Barb, 12-18 GPM | 59896291

$ 96.21

Additional Info

Premium Quality
Secure Payments
Satisfaction Guarantee
Worldwide Shipping

Category:

$ USD

₵ GHS
$ USD
£ GBP

�� Grundfos 43 Series Spa Circulation Pump — 1/15 HP, 115V, 1″ Barb, 12-18 GPM | 59896291 Whisper-quiet, energy-efficient 24/7 circulation for crystal clear spa water ♨️ Product Overview The Grundfos 43 Series 59896291 is a 1/15 HP, 115V, single-speed spa circulation pump that delivers 12-18 GPM of quiet, energy-efficient water flow — the ideal 24/7 circulation pump for spas with low-flow heating systems. Drawing just 0.74 amps (85 watts), this pump costs pennies per day to operate continuously, providing constant filtration and heating circulation for cleaner, warmer spa water around the clock. The 43 Series has been completely redesigned with an ingenious rotating volute that allows installation in all plumbing configurations — simply rotate the water connections to match your existing plumbing without cutting or re-routing pipes. The 1″ barb inlet and outlet connections with center suction and side discharge fit standard 1″ spa plumbing. For spas with 3/4″ plumbing, order adapter barbs (part 1429-131, sold separately) to convert from 1″ to 3/4″. Built on Grundfos’s proven wet rotor design, the rotor runs directly in the pumped liquid — meaning there is no mechanical shaft seal to leak or replace. This eliminates the most common failure point in conventional spa circulation pumps and delivers truly maintenance-free, whisper-quiet operation. The compact, lightweight design makes it an excellent replacement for higher-priced brands including Laing and Waterway circulation pumps. This is the standalone OEM pump — it does not include a power cord (order separately) and does not include plumbing adapters for 3/4″ conversion. If you need a complete kit with cord, unions, fittings, adapters for both 3/4″ and 1″ plumbing, and mounting hardware, see the Grundfos Universal Kit 99575701P1 instead. ⚠️ POWER CORD NOT INCLUDED. This is an OEM pump without a cord. Order your pump cord separately based on your spa’s connector type. ⚠️ 1″ BARB CONNECTIONS. If your spa uses 3/4″ plumbing, you will need two adapter barbs (1429-131) and appropriate 3/4″ tubing (55-270-1513). These are sold separately. �� 110V, 115V, and 120V are used interchangeably when referring to spa circulation pump voltage. This pump operates on standard US household voltage. ⭐ Key Features ✅ 1/15 HP — 115V — 0.74 Amps / 85 Watts — Ultra-low energy consumption, pennies per day for 24/7 operation ✅ 12-18 GPM Flow Rate — Optimal flow for low-flow spa heating systems and continuous filtration ✅ Grundfos 43 Series — Type UP15-43SPA — Redesigned, current-generation Grundfos spa circulation pump ✅ Rotating Volute — Adjustable to any angle for all plumbing configurations — no replumbing needed ✅ 1″ Barb Inlet and Outlet — Center suction, side discharge — standard 1″ spa plumbing ✅ Wet Rotor Design — No mechanical shaft seal to leak or replace — truly maintenance-free ✅ Whisper-Quiet — Near-silent operation ideal for 24/7 continuous duty ✅ Compact and Lightweight — Easy installation in tight spa equipment compartments ✅ Replaces Laing and Waterway — Direct replacement for Laing E10, SM909, Waterway, and many other circ pumps ✅ 30 Cross-Reference Part Numbers — Replaces dozens of discontinued and current circulation pumps ✅ Grundfos Quality — World-leading pump manufacturer, proven reliability ✅ 1-Year Warranty — Manufacturer warranty for peace of mind �� Technical Specifications Specification Value Manufacturer Grundfos Series 43 Series Type UP15-43SPA (replaces older UP15-38SPA) Part Number 59896291 Also Known As 31842 Allied Part Number 1-00-0184 UPC 632514098909 Pump Type Spa Circulation Pump — Single Speed — 24/7 Continuous Duty Design Wet Rotor (no mechanical shaft seal) Horsepower 1/15 HP Voltage 115V (also listed as 110V / 120V — same standard) Frequency 60 Hz Phase Single Phase Amperage 0.74A Wattage 85W Speed Single Speed Flow Rate 12-18 GPM (approximately 570 GPH) Suction Port 1″ Barb — Center Suction Discharge Port 1″ Barb — Side Discharge Volute Rotating — adjustable to any angle Volute Fastening 4 Screws Drain Plug Location 4 o’clock Mounting Footless design with removable mounts Power Cord ❌ NOT INCLUDED — order separately Unions/Adapters ❌ NOT INCLUDED — order 1429-131 for 3/4″ conversion Warranty 1 year manufacturer warranty ⚡ Electrical Requirements Electrical Spec Requirement Supply Voltage 115V (110V / 120V — same standard) Frequency 60 Hz Phase Single Phase Full Load Amps 0.74A Wattage 85W Power Cord ❌ NOT INCLUDED — order separately ⚠️ Hot tubs require GFCI (Ground Fault Circuit Interrupter) protection. ⚠️ A dedicated circuit is required — do not share with other appliances. ⚠️ This pump is 115V ONLY. If you need a 230V version, see the Grundfos 43 Series 230V (59896292 / PU602394). �� Compatibility Guide This Pump (59896291) vs. Grundfos Universal Kit (99575701P1) Feature 59896291 (THIS PUMP) 99575701P1 (Universal Kit) Speed Single Speed 3-Speed (Low/Med/High) Voltage 115V 115V Amperage 0.74A / 85W Low: 0.43A/47W — Med: 0.64A/73W — Hi: 0.95A/110W Connections 1″ Barb 3/4″ Barb (1″ adapters included) Cord Included ❌ No ✅ Yes Unions/Fittings Included ❌ No ✅ Yes — complete plumbing kit Mounting Kit Included ❌ No (footless design) ✅ Yes — spa foot mounting kit 3/4″ Adapters Included ❌ No — order 1429-131 separately ✅ Yes Best For Direct replacement where cord and fittings already exist Universal replacement from scratch — any brand/model Grundfos 43 Series Family Voltage Connection Part Number Notes 115V (THIS PUMP) 1″ Barb 59896291 / 31842 Standalone OEM pump 230V 1″ Barb 59896292 / PU602394 230V version 115V 3/4″ & 1″ Barb 99575701P1 3-speed universal kit with cord and fittings 230V 3/4″ & 1″ Barb 10-0138-KIT 3-speed universal kit with cord and fittings 3/4″ Plumbing Conversion If your spa uses 3/4″ plumbing instead of 1″ plumbing, you will need: 2x Adapter Barbs — Part 1429-131 (reduces 1″ barb to 3/4″ barb) 3/4″ ID Tubing — Part 55-270-1513 (50 ft roll, cut to length as needed) �� TIP: If your existing pump has 3/4″ barb connections and you want to avoid adapters, consider the Grundfos Universal Kit 99575701P1, which comes with 3/4″ connections standard plus 1″ adapters and all fittings included. �� Alternate Part Numbers The Grundfos 59896291 replaces the following circulation pumps. If your existing pump shows any of these numbers, the 59896291 is a compatible replacement: Grundfos Previous and Cross-Reference Numbers Part Number Notes 59896291 Current model (this pump) 31842 Grundfos alternate designation 1-00-0184 Allied Innovations 1-00-0046 Allied Innovations 15-178-6291 SpaGuts / distributor designation 1030005 Previous Grundfos model 59896132 Previous Grundfos model 59896223 Previous Grundfos model 59896336 Previous Grundfos model 59896351 Previous Grundfos model 59896352 Previous Grundfos model UP15-43SPA Grundfos type designation (current) UP15-38SPA Grundfos type designation (previous — replaced by UP15-43SPA) PUGR1543115S Grundfos model designation PMPUP1538SPA115 Cross-reference GG92007 Cross-reference 632514098909 UPC code HydroQuip Cross-References Part Number Notes 10-0122 HydroQuip 10-0123 HydroQuip 10-0134 HydroQuip — major cross-reference 10-0135 HydroQuip — 230V equivalent designation LHB07100143 HydroQuip Laing and Other Brand Cross-References Part Number Brand / Notes 6050U0011 Laing E10 115V 1″ barb 74069 Laing E10 circulation pump E10-NSHN1W-19 Laing E10 model designation 1-P107GF1B12 Cross-reference 404033 Cross-reference 6425.9 D1 / Dimension One 6956 Cross-reference 70813 Watkins 92007 Cross-reference 9333-01 Cross-reference LB303611 Cross-reference PU602393 Hurricane designation ��️ Installation Requirements What’s in the Box Item Included Notes Grundfos 43 Series circulation pump ✅ Yes 59896291 — complete pump with rotating volute Removable mounting feet ✅ Yes Footless design — mounts attach to pump Power cord ❌ NOT INCLUDED Order separately based on your connector type Unions / fittings / adapters ❌ NOT INCLUDED Order 1429-131 for 3/4″ conversion Mounting Requirement Specification Mounting Position Footless design with removable mounts Base Solid, level surface Volute Rotating — set inlet/outlet at any angle Location Sheltered — protected from frost, rain, direct sun, and dust Access Allow space for electrical connections and drain plug Plumbing Connection Size Notes Suction (center) 1″ barb Standard 1″ spa tubing Discharge (side) 1″ barb Rotating volute — set at any angle For 3/4″ plumbing Order 2x adapter 1429-131 Plus 3/4″ ID tubing as needed Installation Notes ⚠️ POWER CORD NOT INCLUDED — order your pump cord separately. Connect three wires (hot, neutral, ground) per your spa’s wiring configuration. ⚠️ Pump must be installed below water level (flooded suction) — never run pump dry. ⚠️ Rotating volute: Loosen the 4 volute screws, rotate to desired position to match plumbing, and re-tighten securely. ⚠️ GFCI protection is required by the NEC for all hot tub and spa installations. ⚠️ Ensure proper grounding and bonding per NEC requirements. ⚠️ SHELTERED LOCATION REQUIRED — protect from frost, rain, direct sun, and dust. ⚙️ Maintenance Guide Routine Maintenance Task Frequency Notes Check for leaks Monthly Around volute, barb connections, and drain plug Inspect barb connections Monthly Ensure hose clamps are tight Verify pump is running Weekly Listen for quiet hum; check water flow Clean inline strainer (if installed) As needed Remove debris — see part 10-0093 for inline strainer Inspect mounting Quarterly Ensure pump is secure and level Warning Signs — Replace Pump If: Pump does not start or hums but produces no flow Unusual noise (grinding, clicking, excessive vibration) GFCI or breaker trips repeatedly Reduced water flow through heater Visible corrosion on pump housing Wet Rotor Advantage — No Seal to Replace Unlike conventional spa circulation pumps (Gecko CMHP, Waterway Iron Might, Balboa) that use mechanical shaft seals, the Grundfos wet rotor design has no shaft seal. The rotor runs directly in the pumped liquid, which lubricates the bearings. This means: No seal replacement required — the most common circ pump repair is eliminated No seal leaks — the primary cause of circ pump failure is eliminated Longer service life — fewer wearing parts means longer pump life Truly maintenance-free — no scheduled internal maintenance needed �� Ideal Applications Application Suitability Notes ♨️ 24/7 spa circulation and filtration ✅ Yes — Primary use Ultra-low energy, whisper-quiet ♨️ Low-flow spa heater operation ✅ Yes — Primary use 12-18 GPM — designed for low-flow heater systems ♨️ Replacement for existing Grundfos 43 Series ✅ Yes — Direct Same pump, same connections ♨️ Replacement for Laing E10 (1″ barb) ✅ Yes — Direct Same 1″ barb connections ♨️ Replacement for Laing E10 (3/4″ barb) ✅ Yes — With adapters Order 2x adapter 1429-131 ♨️ Replacement for Laing SM909 / SM1212 ✅ Yes With appropriate adapters ♨️ Replacement for Waterway Tiny Might (1″ barb) ✅ Yes Same 1″ barb connections ♨️ Watkins / Hot Spring / Caldera spas ✅ Yes Replaces 70813 ♨️ D1 / Dimension One spas ✅ Yes Replaces 6425.9 ♨️ Spas needing adjustable flow rate ❌ No This is single speed — for 3-speed, use 99575701P1 ♨️ 1-1/2″ plumbing applications ❌ No Use Gecko CMHP or similar for 1-1/2″ plumbing ♨️ 230V applications ❌ No Use Grundfos 59896292 (230V version) ❓ Frequently Asked Questions Q: What horsepower is this pump? A: 1/15 HP — drawing 0.74 amps (85 watts) at 115V. Extremely energy efficient for 24/7 operation. Q: What is the flow rate? A: 12-18 GPM (approximately 570 GPH), depending on plumbing resistance. Optimal for low-flow spa heating systems. Q: Is a power cord included? A: No — the cord is sold separately. Order based on your spa’s connector type (AMP, mini-JJ, bare cord, etc.). Connect three wires: hot, neutral, and ground. Q: What size are the connections? A: 1″ barb inlet and outlet. If your spa uses 3/4″ plumbing, order two adapter barbs (1429-131) sold separately. Q: Will this replace my Laing E10? A: Yes — the Grundfos 59896291 is a direct replacement for Laing E10 pumps with 1″ barb connections (6050U0011, 74069, E10-NSHN1W-19). For 3/4″ Laing pumps, order adapter barbs 1429-131. Many spa professionals consider the Grundfos a better-value, more reliable alternative to Laing. Q: What is the difference between this pump (59896291) and the Universal Kit (99575701P1)? A: This pump (59896291) is a standalone single-speed OEM pump with 1″ barb connections — no cord, no fittings, no adapters included. The Universal Kit (99575701P1) is a 3-speed pump packaged with a complete plumbing kit (cord, unions, fittings, elbows, 3/4″ and 1″ barb adapters, mounting hardware). The kit is better for first-time replacements where you need everything; this pump is better when you already have the cord and fittings from your previous pump. Q: Does this pump have a shaft seal? A: No — the Grundfos uses a wet rotor design where the rotor runs in the pumped liquid. There is no mechanical shaft seal. This eliminates the most common failure point in spa circ pumps. Q: Can I rotate the volute? A: Yes — the rotating volute is one of the key redesigned features. Loosen the 4 volute screws, rotate to the desired position to match your plumbing, and re-tighten. Q: Is this pump 115V or 230V? A: 115V only (also listed as 110V or 120V — same standard US household voltage). For a 230V version, order the Grundfos 59896292 / PU602394. Q: How quiet is this pump? A: Extremely quiet — near-silent operation. The wet rotor design and precision engineering make it one of the quietest spa circulation pumps available. Q: What does this pump replace? A: Over 30 part numbers including Grundfos 1030005, 59896132, 59896352, UP15-38SPA, Laing 6050U0011, 74069, E10-NSHN1W-19, HydroQuip 10-0134, Watkins 70813, D1 6425.9, and many more. See the full cross-reference list above. Q: Do I need a GFCI breaker? A: Yes — GFCI protection is required by the NEC for all hot tub and spa installations. �� Why Choose the Grundfos 43 Series ✅ Proven Reliability — Grundfos is a world-leading pump manufacturer trusted by spa professionals ✅ Wet Rotor = No Shaft Seal — Eliminates the most common failure point in spa circ pumps ✅ Whisper-Quiet — Near-silent operation for 24/7 continuous duty ✅ Ultra-Low Energy — Just 0.74A / 85W — pennies per day for continuous operation ✅ Rotating Volute — Fits any plumbing configuration without replumbing ✅ 12-18 GPM — Optimal flow rate for low-flow spa heating systems ✅ Compact and Lightweight — Easy installation in tight equipment compartments ✅ Direct Laing Replacement — Same 1″ barb connections, lower price, superior reliability ✅ 30 Cross-References — Replaces virtually every major brand of spa circulation pump ✅ Maintenance-Free — No shaft seal, no scheduled internal maintenance ✅ 1-Year Warranty — Manufacturer warranty backed by Grundfos quality �� Why Buy From Parts4Tubs ✅ Fast shipping across the United States ✅ Expert advice from spa and hot tub specialists ✅ Competitive pricing ✅ Full warranty support ✅ Hassle-free returns ✅ 3/4″ adapter barbs (1429-131) available separately ✅ Pump cords available for all connector types ✅ Grundfos Universal Kit (99575701P1) also in stock for complete replacement needs ✅ Dedicated customer service team ✨ Summary The Grundfos 43 Series 59896291 is a 1/15 HP, 115V, single-speed spa circulation pump delivering 12-18 GPM for 24/7 filtration and low-flow heating. Drawing just 0.74 amps / 85 watts, it operates for pennies per day with whisper-quiet, near-silent performance. 1″ barb inlet (center suction) and outlet (side discharge) with a rotating volute that adjusts to any plumbing angle. Wet rotor design — no mechanical shaft seal to leak or replace — truly maintenance-free. Footless design with removable mounts. Replaces 30 part numbers including Laing E10 (6050U0011, 74069), Grundfos UP15-38SPA, HydroQuip 10-0134, Watkins 70813, and D1 6425.9. Cord and 3/4″ adapters NOT included — order separately. For a complete kit with cord, fittings, and adapters, see the Grundfos Universal Kit 99575701P1. 1-year manufacturer warranty. Available now at Parts4Tubs. Showing 1 – 5 of 5 results Showing all 5 results Showing the single result No results found Sort by Price low to high Sort by Popularity Sort by Rating Sort by Price low to high Sort by Price high to low Sort by Newness Sort by Name A - Z Sort by Name Z - A Filters Sort results Reset Apply Magic Plastics Union 0602-15 (1.5″ Pump Union) | 1-1/2″S x 1-1/2″FBTUnion, Pump, Magic, 1-1/2"S x 1-1/2"FBT (Industry Standard) w/ O-Ring $6.36 Max: 379 Min: 1 Step: 1 Add to cartMagic Plastics Union 0602-20 (2″ Pump Union) | 2″S x 2″FBT w/ O-RingUnion, Pump, Magic, 2"S x 2"FBT (Industry Standard) w/ O-Ring $8.00 Max: 953 Min: 1 Step: 1 Add to cartWaterway Union 400-6010 | 2-1/2″ Union Nut with 2-1/2″ Slip tailpiece and o-ring (2.5″ union)Union, Pump, Waterway, 2-1/2"FBT x 2-1/2"S $14.77 Max: 135 Min: 1 Step: 1 Add to cart1 Speed Pump / Blower / AMP Cord | 21086Amp Plug, Pump, 1-Speed, 14/3, 4-Pin, 5' Cord, White $24.71 Max: 435 Min: 1 Step: 1 Add to cartBalboa Amp Plug 21087 (For 2 Speed Pumps)Amp Plug, Pump 1 (2-Speed) 14/4, 72" Long, White $31.72 Max: 160 Min: 1 Step: 1 Add to cart Hot Tub Pump Collar & Union Size Chart Hot Tub Pump Collar & Union Size Chart Imperial & Metric Specifications Union Size Collar Size Thread OD Union OD O-Ring Size 1.5" Female ButtressThread (FBT) 2.5" / 64mm (Tip to Tip)Measurement 2-1/2" 64mm 2-13/16" 71mm 2-5/16" OD 59mm 2" Female ButtressThread (FBT) 3.1" / 78mm (Tip to Tip)Measurement 3-1/16" 78mm 3-3/8" 81mm 2-15/16" OD 75mm 2.5" Female ButtressThread (FBT) 3.6" / 91mm (Tip to Tip)Measurement 3-5/8" 91mm 4-1/4" 108mm 3-7/16" OD 87mm Important Notes The union "size" (1.5", 2", 2.5") is nominal and doesn't correspond to any actual measurement. Collar size is measured from thread tip to thread tip on the pump outlet. Most hot tub pumps use Female Buttress Thread (FBT) - 98% of applications. O-ring gaskets may vary between manufacturers - measure your existing gasket for accuracy. How do I Replace a Hot Tub Pump? Here's a general step-by-step guide on how to replace a hot tub pump. Keep in mind that the specific steps may vary depending on your hot tub's make and model, so it's essential to consult your hot tub's manual for model-specific instructions. If you're not comfortable with this procedure, it's a good idea to seek professional assistance. Materials You'll Need: Replacement pump Pipe wrench Adjustable wrench Screwdriver Pipe sealant (thread tape or plumber's putty) PVC primer and cement (if you have PVC plumbing) Teflon tape (for threaded connections) Procedure: Turn Off the Power: Before you begin, ensure the hot tub's power supply is turned off at the circuit breaker or disconnect switch. Safety should always be a priority when working with electrical components. Drain the Hot Tub: If your hot tub is not already empty, you'll need to drain it. Follow your hot tub's manual or manufacturer's instructions for proper draining. (You might not need to do this if you can lock the pump off with the gate valves) Locate the Pump: Identify the location of the existing pump in your hot tub. It's usually located near the equipment area or in a designated pump compartment. Disconnect the Electrical Wiring: Carefully disconnect the electrical wiring from the old pump. This typically involves removing the electrical conduit cover, unscrewing wire nuts, and disconnecting the wires from the terminals. Be sure to note the wire connections or take a picture for reference when connecting the new pump. Disconnect the Plumbing: Depending on your hot tub's plumbing setup, you'll need to disconnect the plumbing connections to the pump. Use a pipe wrench or adjustable wrench to loosen and remove the fittings. Be prepared for some water spillage when disconnecting the plumbing. Remove the Old Pump: Once the electrical and plumbing connections are detached, carefully remove the old pump from its mounting position. Some pumps may be secured with mounting brackets or bolts. Prepare the New Pump: If the new pump is not pre-assembled, you may need to attach fittings, unions, or adapters to match your hot tub's plumbing. Ensure that you use the appropriate sealant or Teflon tape on threaded connections to prevent leaks. Mount the New Pump: Position the new pump in the same location as the old one and secure it in place using the mounting brackets or bolts. Reconnect Plumbing: Reconnect the plumbing to the new pump, ensuring that all connections are tight and secure. If your hot tub uses PVC plumbing, use PVC primer and cement to bond the connections properly. Reconnect Electrical Wiring: Reconnect the electrical wiring to the new pump, following the notes or pictures you took earlier. Make sure all wires are properly connected and secure. Turn On the Power: Restore power to the hot tub by switching on the circuit breaker or reconnecting the disconnect switch. Test the Pump: Turn on the hot tub's pump to ensure that it's working correctly. Check for any signs of leaks or irregularities in the plumbing connections. Refill the Hot Tub: Once you've confirmed that the new pump is functioning properly, refill the hot tub with water. Check for Leaks: Inspect the plumbing connections for any leaks. If you find any, turn off the pump, drain the tub again, and reseal the connections as needed. Monitor: Keep an eye on the pump and plumbing for the next few days to ensure everything is functioning correctly and that there are no further issues. Remember that this is a general guideline, and the specific steps may vary based on your hot tub's design. If you're unsure or uncomfortable with any aspect of this process, please do get in touch, happy to help. How do I know what size hot tub pump I have? Determining the size of your hot tub pump is an important step when it comes to maintenance or replacement. To find out the size of your hot tub pump, follow these steps: Check the Manual: The easiest way to determine the size of your hot tub pump is to consult the owner's manual or user documentation that came with your hot tub. The manual typically contains detailed information about the specifications and components of your hot tub, including the pump. Look at the Pump Housing: If you don't have access to the manual or it doesn't provide the information you need, inspect the pump itself. Most hot tub pumps have a label or plate on the pump housing that displays essential details, including the pump's model number, manufacturer, and specifications. You can then send that to me or Google it. Measure the Pump: If the label is missing or damaged, you can measure the pump's dimensions. Measure the diameter of the pump's wet end (the part where the water flows) and the length of the wet end. These measurements can help identify the size and capacity of the pump. Consult the Manufacturer: If you can't find the information on the pump or in the manual, contact the hot tub manufacturer or a reputable dealer. Provide them with your hot tub's model and serial number, and they should be able to identify the correct pump size for your specific hot tub. Online Research: You can also search online using the pump's model number or hot tub's make and model. Many manufacturers provide detailed information about their products on their websites, and you may find specifications for your pump model. Once you have determined the size and specifications of your hot tub pump, you can proceed with maintenance, repairs, or replacement if necessary. Keep in mind that replacing a hot tub pump with the same size and capacity as the original is crucial to ensure proper water circulation and filtration in your hot tub. If you're unsure about any aspect of this process, get in touch, always happy to help.

Grundfos 43 Series Spa Circulation Pump — 1/15 HP, 115V, 1″ Barb, 12-18 GPM | 59896291

Related products

Laing E-10 EcoCirc 6050U0013 Spa Circulation Pump – 115V 3/4″ MPT Threaded

Laing E-14 EcoCirc LMB07102983 Spa Circulation Pump – 230V 1-1/2″ MBT

Laing E10 Spa Circulation Pump — 1/40 HP 230V 3/4″ Barb | 73979

Grundfos 43 Series Spa Circulation Pump — 1/15 HP, 115V, 1″ Barb, 12-18 GPM | 59896291